ADVANCES IN CEMENT RESEARCH

Alite calcium sulfoaluminate cement: chemistry and thermodynamics

Adhesion characterisation of Portland cement concrete and alkali-activated binders

Effect of ground granulated blast-furnace slag on the hydration and properties of cement paste

Synchrotron Pair Distribution Function analyses of Ye’elimite-based pastes

Design of self-desiccating binders using CSA cement: influence of the cement composition and sulfate source

Modelling microstructural changes of ordinary Portland cement paste at elevated temperature

CSA and slag: towards CSA composite binders

Experimental study on preventing expanded polystyrene concrete segregation

Construction and demolition waste as partial cement replacement

Effect of red mud addition on oil well cement at high temperatures

Effects of sodium chloride on the mechanical properties of slag composite matrix geopolymer

Understanding the aqueous phases of alkali-activated slag paste under water curing

Anhydrite, blast-furnace slag and silica fume composites: properties and reaction products

Distribution of heavy metal elements in chromium (III), lead-doped cement pastes

Early carbonation curing effects on the microstructure of high initial strength Portland cement pastes

Temperature and age effects on mechanical behaviour of phosphorus slag-based concrete

Effect of calcined dolomite addition on sodium carbonate-activated slag cements with different curing methods

Long-term mechanical properties of cellulose fibre-reinforced cement mortar with diatomite

Mechanical properties and microstructure of ultra-high performance cement-based composite incorporating RHA

Influence of modern coal-fired power technologies on fly ash properties and its use in concrete

Shrinkage mitigation of alkali-activated slag with natural cellulose fibres

Concrete application of clinker-efficient cements

Influence of graphene oxide on hydration characteristics of tricalcium silicate

Effect of novel binaphthol admixture on the hydration characteristics and mechanical properties of OPC pastes

Synthesis and properties of a modified sodium carboxymethylcellulose superplasticiser

Effects of polycarboxylate architecture on flow behaviour of cement paste

Celitement quality parameter determination by online NIR spectroscopy

Influence of carbonation on chloride penetration of pastes under cyclic wetting–drying conditions

Mechanical and self-sensing properties of concrete reinforced with carbon nanofibres

Study of the reaction stages of alkali-activated cementitious materials using microcalorimetry

Synthesis of star-comb PCE superplasticiser towards an understanding of its properties in cement pastes

Voronoi diagrams and self-healing cementitious materials: a perfect match

Natural restoration of mechanical properties of concrete subjected to high temperature

Cement reinforcing and toughening agent microcrystalline brownmillerite: preparation and hydration

Influence of sodium chloride on the hydration of calcium aluminate cement constantly cured at 5, 20 and 40°C

Early hydration of CSA cement modified with styrene–butadiene copolymer dispersion

Thermal activation mechanism and pozzolanic activity characteristics of coal flotation tailing

Durability of airport concrete pavement improved by four novel coatings

Research on the effectiveness of polycarboxylate superplasticisers with different side-chain lengths

Synthesis and performance evaluation of a polymer microsphere based nanosilica as a cementing fluid loss reducer

Performance of low amorphous silica fly ashes in mortars

Analytical study of the drying shrinkage in light-weight concrete containing EPS beads

Acceleration effect of synthesised calcium silicate hydrate with different morphologies and Ca/Si on cement hydration

Durability of silica aerogel cementitious composites – freeze–thaw resistance, water resistance and drying shrinkage