IRONMAKING & STEELMAKING

Research of microalloy elements to induce intragranular acicular ferrite in shipbuilding steel

Viscous characteristics and modelling of CaO–Al2O3-based mould flux with B2O3 as a substitute for CaF2

Electromagnetic torque detecting for optimization of in-mould electromagnetic stirring in the billet and bloom continuous casting

Inclusion behaviour in aluminium-killed steel during continuous casting

Separation and recovery of potassium chloride from sinter dust of a steel plant

A vertical continuous casting machine for large blooms

Simulation of austenite decomposition in continuous cooling conditions: a cellular automata-finite element modelling

Exploration of morphology evolution of the inclusions in Mg-treated 16MnCrS5 steel

Equilibrium kinetics of manganese-ore carbon-reduction between molten steel and slag

In situ observation of growth behaviour of acicular ferrite in low-carbon steel containing 13\u2005ppm magnesium

Precipitation of nitrides in non-oriented silicon steel

Utilisation of low-grade raw materials for preparation of reactive catalysed-coke for blast furnace application

A novel approach to improve the computing accuracy of rolling force and forward slip

The structure of foaming BOF-converter slag

A novel method for endpoint temperature prediction in RH

Mathematical modelling of slag–metal reactions and desulphurization behaviour in gas-stirred ladle based on the DPM-VOF coupled model

Sticking behaviour and mechanism of iron ore pellets in COREX pre-reduction shaft furnace

Effect of mixing charge of highly reactive semicoke nut on the reaction of high Al2O3 ferrous burden in blast furnace

Effects of warm extrusion temperatures on tensile properties and fracture morphologies of 40Cr steel

A real-time ferroalloy model for the optimum ladle furnace treatment during the secondary steelmaking

Experimental determination of sulphide capacities of blast furnace slags with higher MgO contents

Study on the sintering melting characteristics of Meishan concentrate and its influencing factors

Infrared-based slag monitoring and detection system based on computer vision for basic oxygen furnace

Effect of in-mould electromagnetic stirring on the flow, initial solidification and level fluctuation in a slab mould: a numerical simulation study

Phosphorus distribution between rare earth oxides containing slags and ferromanganese alloy

From waste to wealth: recycling the secondary resource from steel ladle as a flux in Si-killed steelmaking process

Numerical modelling of fluid flows in square billet moulds, using a new nozzle orientation in the presence of an in-mould rotary electromagnetic stirrer

A new method for evaluating cooling capacity of blast furnace cooling stave

Automated break temperature determination of mould slags for the continuous casting of steel based on temperature-dependent viscosity data

Novel concept of fine inclusion removal using carbonate powder injection through the ladle shroud

Study on the effects of Ti micro-addition on the characteristics of MnS inclusions in rail steel

Optimisation model of fuel distribution in materials bed of iron ore sintering process

Experimental investigation of recovery and efficiency of calcium addition through cored wire in steel melt at Visakhapatnam Steel Plant

Effect of slag composition on the cleanliness of drill rod steel

Mathematical modelling of slag entrainment and entrained droplets in a continuous casting mould

Numerical simulation on gas–liquid multiphase flow in hot metal ladle with top submerged lance

Nonmetallic LD slag fines – opportunities by invoking chemistry

Combustion control system for coke ovens embedded with auto positioning systems

Effect of plastic range and ash chemistry on hot strength properties of coke

The influence of slag chemistry on the formation of sliver defects

Analysis of basic network structure of continuous casting mould powder in electromagnetic field

Thermodynamic analysis for the oxidation behaviour of manganese in iron-based melts during demanganisation processes

Experimental investigation on solidification of GCr15 bearing steel by the simulated continuous casting

Height of water pool above lower roll in slab casting

Mn, Si and Ti in cast stainless steel at elevated temperature

Effect of a two-phase region annealing process on microstructure and mechanical properties of medium manganese steel

High-temperature deformation behaviour and microstructural evolution of low carbon steel based on processing map