Temperature Distribution During Friction Stir Welding of AA2014 Aluminum Alloy: Experimental and Statistical Analysis
来源期刊：Transactions of the Indian Institute of MetalsDOI：10.1007/s12666-018-01558-z
Effect of Mechanically Alloyed Graphene-Reinforced Aluminium by Equal Channel Angular Pressing (ECAP)
来源期刊：Transactions of the Indian Institute of MetalsDOI：10.1007/s12666-019-01715-y
Comparisons of Different Data-Driven Modeling Techniques for Predicting Tensile Strength of X70 Pipeline Steels
来源期刊：Transactions of the Indian Institute of MetalsDOI：10.1007/s12666-019-01624-0
Pilot Plant Test on the Recovery of Valuable Metals from Pyrite Cinder by a Combined Process Based on Chlorinating Roasting
来源期刊：Transactions of the Indian Institute of MetalsDOI：10.1007/s12666-019-01580-9
Microwave Processing of Banded Magnetite Quartzite Ore for Iron Recovery
来源期刊：Transactions of the Indian Institute of MetalsDOI：10.1007/s12666-019-01637-9
Benchmarking of Hybrid TIG-MAG Arc Welding for Mild Steel
来源期刊：Transactions of the Indian Institute of MetalsDOI：10.1007/s12666-018-1536-0
Effects of Casting Speed on Thin Gauge Foil Surface Quality of 8079 Aluminum Alloy Produced by Twin Roll Casting Method
来源期刊：Transactions of the Indian Institute of MetalsDOI：10.1007/s12666-019-01563-w
Dislocation Interaction and V-Shaped Growth of the Distorted Structure During Nanoindentation of Cu20Ni20Al20Co20Fe20 (high-entropy alloy)-Coated Copper: A Molecular Dynamics Simulation-Based Study
来源期刊：Transactions of the Indian Institute of MetalsDOI：10.1007/s12666-018-1471-0
Effect of Oxide Fluxes in Activated TIG Welding of Stainless Steel 316LN to Low Activation Ferritic/Martensitic Steel (LAFM) Dissimilar Combination
来源期刊：Transactions of the Indian Institute of MetalsDOI：10.1007/s12666-019-01752-7
Effects of Temporary Alloying and Severe Plastic Deformation on Microstructure Evolution and Mechanical Properties of Ti-Alloys: A Comparative Study
来源期刊：Transactions of the Indian Institute of MetalsDOI：10.1007/s12666-019-01594-3
Effect of Ternary Addition of Cobalt on Shape Memory Characteristics of Ni–Ti Alloys
来源期刊：Transactions of the Indian Institute of MetalsDOI：10.1007/s12666-019-01604-4
Experimental Analysis and Prediction of Springback in V-bending Process of High-Tensile Strength Steels
来源期刊：Transactions of the Indian Institute of MetalsDOI：10.1007/s12666-019-01843-5
Effects of Mechanical Milling Time and Boron Carbide Reinforcement Content on Powder and Hot Extruded Al–2wt.%Cu–B4C Nanocomposites: Microstructural, Mechanical and Fracture Characterization
来源期刊：Transactions of the Indian Institute of MetalsDOI：10.1007/s12666-018-1522-6
Effect of Sm on Microstructure, Mechanical Property and Lattice Constant of As-Cast Mg–11Gd–2Y–0.6Al Alloy
来源期刊：Transactions of the Indian Institute of MetalsDOI：10.1007/s12666-019-01650-y
Investigation on Precipitation Behavior and Morphology of TiN Particles in High-Ti Low-Carbon High-Strength Steel
来源期刊：Transactions of the Indian Institute of MetalsDOI：10.1007/s12666-019-01816-8
Detailed Experimental Investigations on Machinability of EN31 Steel by WEDM
来源期刊：Transactions of the Indian Institute of MetalsDOI：10.1007/s12666-018-1552-0
Comparison of Cooling Behaviour of Carbon Steels in Polymer, Oil and Carbonated Quench Media
来源期刊：Transactions of the Indian Institute of MetalsDOI：10.1007/s12666-018-1542-2
Use of Pre-treated TiO2 as Cathode Material to Produce Ti Metal Through Molten Salt Electrolysis
来源期刊：Transactions of the Indian Institute of MetalsDOI：10.1007/s12666-018-1544-0
Influence of Upset Pressure on Microstructure and Mechanical Properties of Friction-Welded AISI 4140 Low Alloy Steel Pipes
来源期刊：Transactions of the Indian Institute of MetalsDOI：10.1007/s12666-019-01858-y
Wear Behavior of Hot Forged NiTi Parts Produced by PM Technique
来源期刊：Transactions of the Indian Institute of MetalsDOI：10.1007/s12666-019-01671-7
Effect of Heat Treatment on the Mechanical Properties of Squeeze-Cast Al–5Si–3Cu Alloy for Automotive Applications
来源期刊：Transactions of the Indian Institute of MetalsDOI：10.1007/s12666-019-01562-x
Investigations on the Tribological Properties of Heat-Treated Copper Composite Using Hybrid Quadratic–Radial Basis Function Model
来源期刊：Transactions of the Indian Institute of MetalsDOI：10.1007/s12666-019-01777-y
Yield Strength Improvement of an Al-6063 Alloy by Applying a Novel Combination of Cold Working and Heat Treatments for Die Casting of Plastic Parts
来源期刊：Transactions of the Indian Institute of MetalsDOI：10.1007/s12666-019-01609-z
Wear and Fatigue Behaviour of Deep Cryogenically Treated H21 Tool Steel
来源期刊：Transactions of the Indian Institute of MetalsDOI：10.1007/s12666-019-01834-6
Texture–Microstructure Correlation in Hot-Rolled AZ31
来源期刊：Transactions of the Indian Institute of MetalsDOI：10.1007/s12666-019-01648-6
Effect of Pressure on Microstructure and Cooling Curves of A356 Aluminum Alloy During Solidification
来源期刊：Transactions of the Indian Institute of MetalsDOI：10.1007/s12666-019-01682-4
Effect of Recovery and Recrystallization on the Damping Behaviour of A356/SiCp Composites
来源期刊：Transactions of the Indian Institute of MetalsDOI：10.1007/s12666-018-1541-3
Dielectric Properties of Calcium Copper Titanate Ceramics Exposed to Air and Dry Nitrogen Atmospheres
来源期刊：Transactions of the Indian Institute of MetalsDOI：10.1007/s12666-018-1551-1
Influence of Ta Amount on Wear Performance of Aged 17-4 PH Stainless Steel Fabricated by Powder Metallurgy
来源期刊：Transactions of the Indian Institute of MetalsDOI：10.1007/s12666-019-01774-1
Electroless Ni–Al2O3–WS2 Composite Coating on Aluminum Substrate
来源期刊：Transactions of the Indian Institute of MetalsDOI：10.1007/s12666-019-01677-1
Microstructure, Mechanical and Bio-corrosion Behaviour of Thermomechanically Processed Mg–4Li–1Ca Alloy
来源期刊：Transactions of the Indian Institute of MetalsDOI：10.1007/s12666-019-01599-y
Neural Network Modelling to Characterize Steel Continuous Casting Process Parameters and Prediction of Casting Defects
来源期刊：Transactions of the Indian Institute of MetalsDOI：10.1007/s12666-019-01767-0
Physical Simulation Behavior of the Slag in Gas Injection with Non-consumable Lance and Porous Plug for Secondary Refining Operations
来源期刊：Transactions of the Indian Institute of MetalsDOI：10.1007/s12666-019-01794-x
Optimization on Tribological Behaviour of Milled Nano-B4C Particles Reinforced with AZ91 Alloy Through Powder Metallurgy Method
来源期刊：Transactions of the Indian Institute of MetalsDOI：10.1007/s12666-019-01618-y
Effects of semi-solid thermomechanical processing on microstructure and mechanical properties of Al 2024
来源期刊：Transactions of the Indian Institute of MetalsDOI：10.1007/s12666-019-01608-0
Cold Bulge Forming of Aluminum Tubes: Effects of Geometrical and Process Parameters on Formability and Thickness Variation in Bulged Tubes
来源期刊：Transactions of the Indian Institute of MetalsDOI：10.1007/s12666-019-01733-w
Thermal Stability and Mechanical Behaviour of Equal Channel Angular Pressed Structural Steel IS2062
来源期刊：Transactions of the Indian Institute of MetalsDOI：10.1007/s12666-019-01727-8
Surface Characteristics and Distortion Analysis of the Case-Hardened Helical Gears: A Comparison of Different Case-Hardening Treatments
来源期刊：Transactions of the Indian Institute of MetalsDOI：10.1007/s12666-019-01810-0
Studies on Wear Behaviour and DBTT in Sub-zero Regimes of Cryo-Treated High Nitrogen Martensitic Stainless Steel (HNMS)
来源期刊：Transactions of the Indian Institute of MetalsDOI：10.1007/s12666-018-01555-2
Magnetic Seed-Assisted Iron Recovery from the Reductive Leaching Solution in Hydrometallurgical Process
来源期刊：Transactions of the Indian Institute of MetalsDOI：10.1007/s12666-019-01728-7
Mechanism of Interface Reactions Between Fe-2%Al Alloy and High-Silica Tundish Refractory
来源期刊：Transactions of the Indian Institute of MetalsDOI：10.1007/s12666-018-1490-x
Characterization Method of Mechanical Properties of Dissimilar Steel Resistance Plug Welding Joints
来源期刊：Transactions of the Indian Institute of MetalsDOI：10.1007/s12666-019-01817-7
Development of a Sulfamic Acid-Based Chemical Formulation for Effective Cleaning of Modified 9Cr–1Mo Steel Steam Generator Tubes
来源期刊：Transactions of the Indian Institute of MetalsDOI：10.1007/s12666-019-01852-4
Characterisation of Friction Stir Weld Discontinuities by Non-destructive Evaluation
来源期刊：Transactions of the Indian Institute of MetalsDOI：10.1007/s12666-019-01813-x
Synthesis and Characterization of Ce0.85La0.15O1.925 Nanorods (Li, Na)2CO3 Nanocomposites as a Solid Electrolyte for LT-SOFCs
来源期刊：Transactions of the Indian Institute of MetalsDOI：10.1007/s12666-019-01619-x
Study on Properties of Hyper-duplex Stainless Steel 7A of ASTM A-890 (CD3MWN)
来源期刊：Transactions of the Indian Institute of MetalsDOI：10.1007/s12666-019-01811-z
Microstructural Evolution of Inconel 718 During Pancake Forging
来源期刊：Transactions of the Indian Institute of MetalsDOI：10.1007/s12666-019-01645-9
Nondestructive Evaluation for Detection of Voids in Sodium-Bonded Metallic Fuel Pins
来源期刊：Transactions of the Indian Institute of MetalsDOI：10.1007/s12666-019-01812-y
Development of Wear Mechanism Map for Al–4Mg Alloy/MgAl2O4 In Situ Composites
来源期刊：Transactions of the Indian Institute of MetalsDOI：10.1007/s12666-019-01853-3
Effect of Ni on Microstructure and Mechanical Properties of CrMnFeCoNi High Entropy Alloy
来源期刊：Transactions of the Indian Institute of MetalsDOI：10.1007/s12666-019-01838-2
投稿咨询
加急服务
论文发表
2-4个月录用
7500+文章录用
不成功可退款
